.308 DPMS Compatible Upper Receiver

Posted on by NathanF

.308 DPMS Compatible Billet Upper Receiver
Dimensional correct.
Models are tested and proven, ready for CNC.
Models also available for sale in STEP/IGS file format as well as original SolidWorks Source Files.


  • emnuc25

    Thank you for posting these files. I see that your files are also available in .igs format how do i get access to those files. Again thank you for keeping this information available.

    • http://www.youtube.com/SSIDesigner Nathan F.

      @emnuc25:disqus We can give all that information via e-mail if you want. Or if you preffer you can contact us at contact@ssidefense.com

  • Bob

    Looking for the STEP/IGS and original SW FILES, email would work out excellent. Thanks in advance,
    Bob

    • http://www.youtube.com/SSIDesigner Nathan F.

      @disqus_506ej2f6Vu:disqus e-mail sent

  • alessandro d s

    I can not access the site normally but only with a proxy, I can not even make on the login how can I fix?

    • http://www.youtube.com/SSIDesigner Nathan F.

      @@alessandro_d_s:disqus It should work now.

  • James C

    If possible please e-mail SW and IGS files. Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      James: e-mail sent.

  • Jeff

    If possible would like e-mail of SW and IGS files? Thanks.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Jeff: e-mail sent.

  • Chris

    James.. can you send the SW and IGS files? Thanks

    • Thefixer Ishere

      were you able to get the solidworks file Chris? if so i’d love to get a copy, thebpfixer@gmail.com thanks

  • William J. Zaidel

    Could you send STEP/IGS file format as well as original SolidWorks Source Files?
    Thanks, Bill

    • http://www.youtube.com/SSIDesigner Nathan F.

      E-mail Sent

    • Patrick

      If they sent these files to you, could you possibly send them over to me? Email is Paffmusic@gmail.com Thank you!

  • Ben

    Hi Nathan, I was going to see if I could get the sldprt files for the 308 receiver set as well.

    • http://www.youtube.com/SSIDesigner Nathan F.

      E-mail sent

  • Vince Rozell

    Nathan, can you please send me the solid works sldprt file?
    Thanks

    • http://www.youtube.com/SSIDesigner Nathan F.

      Vince: e-mail sent.

  • chris dickson

    Hello Nathan, can you send me the sldprt files for the upper and lower receivers for the .308?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Chris: e-mail sent.

  • patrick92z28

    Hi Nathan, could you send me the iges file for the upper?
    Thanks

  • Nathan Rankin

    Nathan, could you send me a copy of either the iges or step file for the .308 upper please?

  • Greg Allen

    Hi, Great models, was wondering if i could get the STEP/IGS file format for these models?
    Thanks, David

  • Joshua Schmidt

    Nathan, could you send me the sldprt files for the upper and lower 308 receivers?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Joshua: e-mail sent.

  • Josh

    Hello, Nathan , can I get the 308 prints e-mailed to me? Thanks!

  • Josh

    Just need the upper prints

    • http://www.youtube.com/SSIDesigner Nathan F.

      Josh: the prints are here, just download them.

  • r_gro

    Hi Nathan. Can you please send the 308 Upper and Lower SolidWorks files to me? Thank you!

  • RPE Motorsports

    Can you Please email me the upper and lower 308 receiver in SLDPRT? Thank You in Advance!!!

    • http://www.youtube.com/SSIDesigner Nathan F.

      e-mail sent

  • RPE Motorsports

    Please email me the SLDPRT file to rpemotorsports@gmail.com. Thanks

  • Werner

    Hello Nathan

    Can you please send me the upper, lower and BCG files.

    Thank you in advance

  • Patrick

    Could you send me the STEP/IGS files as well? Thank you

  • Heywood

    I’d like to receive the models in step and native solidworks formats, please. Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      Heywood: e-mail sent.

  • giuseppe mari

    Please, i’d like to receive the upper and lower 308 files in step or igs?
    Thank You in Advance

  • dww6eng

    I’d like to receive the SW file for this please. Thank you

    • http://www.youtube.com/SSIDesigner Nathan F.

      e-mail sent.

  • Arby911

    I’d like to join the legion of others here and request the upper and lower in IGS if you would please.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Ross: e-mail sent.

  • Ryan Sanchez

    Will you please send me this upper and the lower receiver in IGS. Thank you. I very much appreciate it.

    • http://www.youtube.com/SSIDesigner Nathan F.

      Ryan: e-mail sent.

  • Saufkopp

    Hello, very nice work. can you send me the STEP/IGS file, please? thank you very much.

  • Travis Jones

    Could you send STEP/IGS file format please? thanks in advance, Travis

    • http://www.youtube.com/SSIDesigner Nathan F.

      Travis: e-mail sent.

  • madconfusion

    Hi Nathan, I like the lines on this and the combo set. Have you thought about omitting the forward assist? Any chance you’d share this in a readable format (step/iges)? Thanks

  • Average Joe

    Nathan,
    Would it be possible to get a solid model file of the DPMS AR10 upper Rec.?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Joe: Wow, it’s been a long time, I reply you via e-mail.

      • Charlie Johnson

        Can you send me the model files for the upper receiver? You know my email right?

  • Charlie Johnson

    Can you send me the model file of this please?

  • Stephen

    Do you have a Step or Iges file?

    • http://www.youtube.com/SSIDesigner Nathan F.

      Stephen: e-mail sent.